Events Category: Aerospace Perspectives

Aerospace Perspectives Series: Machine Learning Enabled Real-Time Aerodynamic Analysis by Fusing Numerical and Experimental Data

Register Now

Throughout the design process, engineers gather aerodynamic data from multiple sources, including numerical simulations and wind-tunnel testing.

In this webinar, we will explore how data fusion and machine-learning surrogate models can bring together CFD and sparse wind-tunnel measurements to build a more complete view of aerodynamic behavior in real time. By comparing measurements with model predictions while the test is still running, engineers can identify outlying data early, investigate potential test issues, and take corrective actions before the test is complete. This can help avoid costly re-testing, reduce schedule risk, and improve the overall efficiency of the test campaign. We’ll also look at how DLR Models can be visualized and interrogated in Tecplot 360, including exploring pressure distributions at locations where no physical measurement was taken and comparing predictions from models that evolve once new data is available.

This webinar is relevant to engineers and researchers working in simulation, experimental testing, model validation, and data-driven analysis.

What you’ll learn:

  • How real-time data fusion can be used to get insights into aerodynamic behavior during testing.
  • How ML models can help to identify measurement outliers while testing in real time.
  • How CFD-trained surrogate models can be adapted once experimental data is available.
  • How to combine ML models and visualization tools to interactively investigate aerodynamic behavior.
  • How these workflows could evolve to support flight testing and more automated, AI-assisted aerodynamic analysis.
This webinar is free of charge and is open to the public. Registered attendees will receive a post-event email to access the on-demand recording.
Speakers

Philipp Bekemeyer 2026Philipp Bekemeyer
Head of Group for Surrogates and Uncertainty Management at DLR
Institute of Aerodynamics and Flow Technology

Yves Marie Lefebvre 2026Yves-Marie Lefebvre
Chief Technical Officer
Tecplot

 

Aerospace Perspectives Series: Cutting the Cost of Qualifying Additive Flight Hardware

Register Now

Quality makes up a large part of the cost of additive parts today, and the qualification cycle behind that cost still relies on coupon builds, destructive sectioning, and metallography.

Which parts of that bill can non-destructive testing retire? In this webinar, we’ll cover how industrial X-ray CT can measure porosity distribution, density, wall thickness, internal channel geometry, trapped powder, and lack of fusion directly in the flight part. We’ll show how that data maps to the evidence requirements in the frameworks aerospace programs already use, and where CT can replace or supplement destructive testing.

This webinar is relevant to engineers working on hardware such as turbine and engine components, rocket motors, castings and forgings, structural brackets and panels, and defense hardware, including energetics and UAS.

What you’ll learn:

  • Where the real cost sits in an AM qualification program and which portions are addressable through NDT evidence.
  • How CT-derived porosity, density, and geometry data map to existing aerospace qualification frameworks.
  • What CT can and cannot resolve, including physics limitations based on material, wall thickness, and part envelope.
  • How to build a defensible acceptance criterion and detectability argument.
  • How teams can move from sampled inspection to 100% volumetric screening as production rates climb.
This webinar is free of charge and is open to the public. Registered attendees will receive a post-event email to access the on-demand recording.
Speakers

Evan Mathis Headshot 2026Evan Mathis
Enterprise Account Executive
Lumafield

Chris WellsChris Wells
Enterprise Account Executive
Lumafield

 

Aerospace Perspectives Series: Space Systems Modernization: Making the Most of Technology Investments While Constantly Advancing the Mission

 On-Demand Recording Available

Access Replay

Space decision makers are faced with aging infrastructure, shrinking budgets, and evolving mission needs that grow more complex by the second. How can they modernize in place without exposing their mission to risk while also preparing for the next challenge? Leaders from NASA, NOAA, and the U.S. Space Force will discuss innovative ways as to how their programs are adopting practices and solutions to adapt to a demanding space environment. The panel will explore topics ranging from automation and the cloud, to software and model-based systems engineering, and more.

Speakers:
Kevin Coggins 2025Kevin Coggins
Deputy Associate Administrator, NASA
Ronla Henry Reeves 2025Ronla Henry-Reeves
Advanced Weather Interactive Processing System (AWIPS) Program Manager, National Oceanic and Atmospheric Administration
Russ Teehan 2025Russ Teehan
Technical Director, Space Development Agency, United States Space Force
This webinar is free of charge and is open to the public. Registered attendees will receive a post-event email to access the on-demand recording.